$135 + Delivery fee if applicable
A 900 watt vocal PA with 2 Yorkville 15inch speakers on speaker stands
& two Rockit monitor wedges.Front of house is powered by a Jansen 600 watt stereo amp
via a Spirit Folio desk which has 8 mike channels plus 2 stereo line channels.Monitors are
powered by a 300 watt Peavey amp . Shure SM58 mikes are supplied as needed.
delivery and set up (price dependent on times and location)
Additional amp and Sub Bin $45
Alesis reverb unit $15
CD player $15
Numark DJ mixer $15
All prices include GST
$340 approx with engineer
A 1200 watt mike up PA with 2 Yorkville speakers on stands powered
by two stereo 600 watt Jansen Amps.Also includes 3 Rockitt wedges and a 15 inch RMS sub
bin with built in crossover.
Shure SM58 mikes , kick drum and instrument mikes and DI's are supplied as required , as
well as mike stands and leads.
Spirit Folio desk ( 8 mike channells plus 2 stereo line channells)
16 Channell multicoil for front of house mix.
Alesis stereo compressor
This rig requires a sound engineer to run it , we can supply an engineer with the
additional fee dependant on the location and duration of the gig.
Prices include delivery and set up and gst.
$450 approx with engineer
A 2000 watt mike up PA.This rig has all the components
of Rig B with an additional two Yorkville cabinets , a fourth stage monitor , and a 2 X
15inch sub added on.An 800 watt Peavey amp is included along with the two 600 watt Jansen
amps.An additional desk can be added if required..Microphones and outboard are supplied as
required for the event.
Exact pricing is dependent on the location and
duration of the event.
Prices include delivery and set up and gst
20 metre Multicoil
20 m, 16 channel (12/04) snake
Holden Wasp 100 Watt or Peavey 300 Watt amp with 2 X 15inch Fanes in
Holden Wasp 100 watt with Sovtek Quad Box
Vox Venue 100 watt combo amp
Geni auto controller for Par cans (rca
audio in , 3 channel , 4000 watt capability) $20
1 X 300 watt PAR can $30
2 X 300 watt PAR can $40
3 - 6 PAR cans - 3=$60 4=$70 , 5 =$80 , 6 = $85
7-9 PAR cans - 7=$90 8 =$92.50 9 = $95
2 light stands with Tbars are available for $10 ea if hired with 4 or more cans
(otherwise usual price of $15 applies.)
9 cans,controller and both stands $120
Colour gels are supplied at no extra charge with the proviso that they are returned in the
condition they are sent out. Replacement costs
for torn or ripped gels are $20 each.
A 12 inch mirror ball is available for
$20 , a motor to rotate the ball is an additional $5.00.A pin spot light is another
$10.00.A T bar lighting stand is an additional $15.00.The total cost for complete set up
Geni-Spyro 250 light - shoots moving coloured
patterns syncronised with music!
Minimoon Light - shoots coloured beams
in time to music
Proel Hydraulic light stand
(includes free remote and fog juice)
COMBO Smoke Machine /
Spyro-250 / Minimoon
/T Bar Stand
Oil wheel Projector 750 watts
Oil wheel Projector 150 watts
Both Oil wheel Projectors
White Backdrop 5 X 7 metres
When turning 750 watt projector off
with the switch on the projector , the fan continues to blow until the power is switched
off at the wall. Let the fan run until no more hot air is blowing from the projector. Only
then is it safe to move the projector without blowing the bulb.
The hire accepts responsibility for replacing the glass oil wheels if they are damaged
during hireage or transit.The wheels are worth approx $180 each.
NOTE: Let lights cool after use before packing down or moving as bulbs blow whern lights
are moved while hot.
Generator Clause - If the hirer is using
an external power source or generator they are responsible for the repair costs for any
damage caused by spikes or power surges (including blown bulbs). Make sure the right sort
of generator is used and use seperate generators for lights and sound.
To Earwig Studios